1.866.473.6900
We're here to help [hours]

Analytical Scales

Even early analytical scales were constructed with the upmost precision and delicacy. While these scales may have lacked the ruggedness of today’s digital models, they were just as accurate. Shortly after being introduced in the science community, analytical balances quickly became a necessity for all reputable laboratories. The toughest task was designing the mechanism to weigh perfectly while at full capacity.

Analitycal balance No.13, No.14

Analytical Balance No.13

Independent arrest for pans with automatic stop. Polished mahogany and glass case, front sliding frame counterpoised. Dimensions of case: 44 3/4 in. long, 16 in. wide, 40 in. high. (more…)
Read more

Analitycal balance No.11, No.12

Analytical Balance No.11

  Polished mahogany and glass case, front sliding frame counterpoised. Dimensions of case: 25 in. long, 12 in. wide, 22 in. high. Specific gavity support, and holder for weighing test tubes, with counterpoise. (more…)
Read more

Analitycal balance No.9, No.10

Beam graduated in 1/10 milligram. Independent arrest for pans with automatic stop. Polished mahogany and glass case, front sliding frame counterpoised. Dimensions of case: 23 1/4 in. long. 10 1/4 in. wide, 18 3/4 in. high. (more…)
Read more

Analytical chainomatic balance No. 9

The special construction of the beam arrest not only insures the positive alignment  of the agate edges with their respective bearings, but is so designed that the center agate knife edge is directly over the center of the column. This is of great importance when the balance is loaded to
Read more

Analytical Balance No. 10

The special construction of the beam arrest not only insures the positive alignment of the agate edges with their respective bearings, but is so designed that the centre agate knife edge is directly over the centre of the column. This is of great importance when the balance is loaded to
Read more

Analytical balance No. 15

15 cm (6'') long, sawed from hard rolled special aluminum alloy, having great tensile strength and uniform density. Will sustain full load without flexure and maintain adjustment through varying temperature changes. Graduated each side of the centre 1/10 mg. To 5 mg. Read more